|
|
|
|
 |
HR85174 SWITCH, ENGINE OIL PRESSURE
|
|

HR85174 Engine Oil Pressure Switch
|
|
 |
|
|
|
|
 |
OIL FILTER - QTY. OF 1
|
|

P558329H Engine Oil Filter - Qty. of 1 Specifications: Length 6.72", Outer Diameter 5.06", Thread Size 1-1/2"-12.
|
|
 |
|
|
|
|
 |
FUEL FILTER - QTY. OF 1
|
|

P556745H Fuel Filter - Box Type - Qty. of 1 Specifications: Height 3.28", Width 3.71", Depth 5.04".
|
|
 |
|
|
|
|
 |
88RE10982 PRESSURE RELIEF VALVE
|
|

88RE10982 Hi-Pressure Relief Valve (HPRV), w/ 6E171 Nippondenso Compressor 12MM Male Switch Thread Directly Into 88RE10981 6E171 Compressor Discharge Manifold. Includes O-Ring.
|
|
 |
|
|
|
|
 |
888301284 KIT, LOW VOLTAGE
|
|

888301284 Low Voltage Clutch Coil Protection Kit Kit Protects Compressor Clutch Against Failure Due to Low or Varying Clutch Supply Voltage.. If Clutch Supply Voltage Drops Below 12 Volts, Relay Picks Up Charging Voltage From + Starter Post, Will No...
|
|
 |
|
|
|
|
 |
88RE10981 MANIFOLD,DISCHARGE,DENSO COMPRESSOR
|
|

88RE10981 Discharge Manifold, w/ 6E171 Nippondenso Compressor Discharge Port Manifold, w/ #8 (1/2" Male Insert O-Ring) Hose Fitting, w/ 12MM Female Port. Includes: Gaskets and O-Rings. Associated Items: 88433 (Denso Suction & Discharge O-Ring) - 88...
|
|
 |
|
|
|
|
 |
88RE10980 MANIFOLD, SUCTION, DENSO COMPRESSOR
|
|

88RE10980 Suction Manifold, w/ 6E171 Nippondenso Compressor Suction Port Manifold, w/ #10 (3/4" Male Insert O-Ring) Hose Fitting, w/ R12 Charging Port. Includes: Gaskets and O-Rings. Associated Items: 88433 (Denso Suction & Discharge O-Ring) - 8841...
|
|
 |
|
|
|
|
 |
FUEL FILTER - CASE OF 12
|
|

P556745 Fuel Filter - Box Type - Case of 12 Specifications: Height 3.28", Width 3.71", Depth 5.04".
|
|
 |
|
|
|
|
 |
8890179 RECEIVER/DRIER-NEW
|
|

8890179 Receiver Drier - Genuine Parker 4" x 9" - Inlet #6 (3/8" Female O-Ring), Outlet #6 (3/8" Male Insert O-Ring). Associated Items: 88411 (#6 Fitting O-Ring).
|
|
 |
|
|
|
|
 |
88AZ45582 RECEIVER/DRIER-NEW
|
|

88AZ45582 Receiver Drier 4" x 8-1/2" - Inlet #6 (3/8" Female O-Ring), Outlet #6 (3/8" Male Insert O-Ring). Associated Items: 88411 (#6 Fitting O-Ring).
|
|
 |